I need a 2 for 1 buddy -- just determined that I am going to track on this day - I am getting some Tuaty coaching -- finally! Anyone need a buddy?

I'm game - John Micalizio - Black Camaro - what do you need me to do?

Awesome, John. I will sign up and pay for the event and note in the registration comments that you are my buddy. Then you can register and choose the Pay By Check method and state in the comments that I am your buddy. Then, you and I square up at the track.

Sorry, John, one edit. You dont choose to pay by check, you enter a dummy credit card number. The instructions are on the ERME site.

Ok, I'm all signed up and coming to play with the big dogs!

Hi guys, I'm looking for a NOVICE 2-for-1 buddy for my brother. Price is a little higher for novice drivers (due to the instructor), so if you're a novice driver and looking for a 2-for-1... please let me know.
Looking forward to seeing all of you out on the track again. Mark, looking forward to the triumphant return of your BMW. Aldo, you should be as fast as me by now. Same with you John. Leo... you stole my 2-for-1 buddy :( just kidding.

Yes Carlos, I got faster - but Juan sent me to school... I am fabricating brake ducts (driver side finished today - back to the welder tomorrow for the other side). Discovered that 3" ducting really doesn't work so I just ordered 2". Everything should be together for the 23rd.

Nobody sells prefab duct plates (which is what I assume you are having welded) for the Camaro? Jeez- that's a business opportunity for someone who can weld.

Mark - I posted a picture of the first plate.

Hey John, that brake duct plate looks great... where are you going to put the intake? With so much brake cooling, you're going to have to drive a lot faster to make them worth while... Kind of like that, other "Stock" Camaro out on the track...

Looks great- it looks like you even have the part of the hole directly over the rotor surface blocked off so that all the air is directed towards the center so it can go through the rotor vanes. Very Nice.
I'll check yours out on the 23rd. You can take a look at mine- the biggest pain for me was conceiving a way to route the hosing so there would be no rubbing.

The intakes are 4" x 8.5" located to the far right and left of the lower grille. I have to reduce the tubing size to 2" as the 3" gets crushed in the suspension. New parts are on the way.

The fabricator/welder is Denis Ceraolo - Automotive, Inc, 1501 sw 10th street Delray Beach 33444 (561)-272-7451

I need a novice buddy for 2-for-1. Any takers?

Josh, and anyone else needing a two-fer partner: please contact Juan Veloza. He was my brothers sign-up buddy but we are not going to make it.

The rear tires on the porche are corded and tires are on back order so I am back in the ISF. Track is going to feel like its in slow motion.

Carlos - I am not going to be able to make it and John Micalizio is my buddy and he already paid. Can you help me get him hooked up with someone? (John - I am in for my half if you dont get a buddy so dont sweat it.) Very sorry for change in plans but the used Nitrons I just bought came in with wrong mounts and only discovered last night. Car is in pieces - no new parts until Tuesday. Bummed.

Josh Grubman is now Juan Veloza's 2-for-1 buddy. ERME has been notified. Doctor's orders say I can't be on the track for a while. Yes, really bummed. Anyone else looking for a two-for-one, please contact John Micalizio. Hope everyone has a great time at the event. I'll have TrackWeekend.com t-shirts for everyone at the next event.

Carlos - hope you get better fast!

my buddy backed out last minute so if anyone wants to sign up with me for the 2-1 let me know we'll go 50/50. I already paid the $300.

found 2-1 buddy

if you are not going to race what do you have to do to just come and watch

Just come on down watch,it's free. You have to enter the track at gate 18, which is around the back on the south side...

Just come and watch.

I saw a lot of photographers there. Anyone have pictures or know where to find them?

I think it was Juha

http://www.photosbyjuha.com/index.cfm?template=event&...

I rec'd an email from Juha, he changed plans and didn't attend. Any clue who WAS there?

Thier was an amateur photographer there, he works for active autowerke. His name is Ray, he's a very modest guy that takes really good pics ,even though he will deny it lol . i will try to get his email for you. Im sure you will like his photos!!!

TLM one and two for the 3/6 hours of Miami by FARA
BMW won the 6 hours, Honda won the 3 hours. what a weekend.

I just received some of the digital shots from Ray Schneider, and they are EXCELLENT! rgschnidr@gmail.com

where can you go to see them? link?
thanks

email him and tell him which car you were driving. Give your phone number so he can call you. He negotiates the price as he is new to all this. I offered $5 each for the download.